挤压
流变学
食品科学
吸水率
粒径
无麸质
材料科学
水分
含水量
面筋
化学
复合材料
岩土工程
物理化学
工程类
作者
Maria Barbara Różańska,Patrycja Kokolus,Jakub Królak,Patrycja Jankowska,Agata Osoś,Magda Romanowska,Łukasz Szala,Przemysław Łukasz Kowalczewski,Jacek Lewandowicz,Łukasz Masewicz,Hanna Maria Baranowska,Sylwia Mildner–Szkudlarz
摘要
The present study aimed to evaluate the effect of the extrusion process and particle size on the properties of rice flour (microstructure, pasting properties), gluten-free dough (rheological properties), and bread (texture, specific volume, water absorption capacity, low-field nuclear magnetic resonance (LF NMR) relaxometry). Rice flours were extruded at 80 and 120 °C with feed moisture (15 and 30%) and with the same particle size (<132 and >132–200 µm). Significant differences were observed between the pasting profiles of the flours before and after extrusion. The pasting profile of extruded flours confirmed that hydrothermal treatment partially gelatinized the starch, decreasing the viscosity during heating. The water binding properties increased with the extrusion temperature and moisture content and also with the particle size of the flour. The most important parameter influencing the mechanical properties of the dough was the moisture content of the flour and significant differences were observed between fine (<132 μm) and coarse flours (>132–200 μm). The molecular dynamics of particles containing protons in the bound and bulk fractions in each sample do not depend on the extruder parameters or granulation of the obtained fraction. LF NMR results confirmed that extrusion of rice flour led to a significant decrease in the T21 value compared to the control sample and an increase in the T22 value in breads made with flours with particle size <132 μm. A linear relationship was found between the spin-spin relaxation times (T1) changes and the equilibrium water activity (ar). The results showed that bread with extruded rice flour at the same die temperature resulted in a significantly higher bread volume (31%) and lower hardness (27%) compared to the control. The highest hardness was observed in the case of samples prepared with extruded flour with the addition of 15% moisture, regardless of temperature and particle size.
科研通智能强力驱动
Strongly Powered by AbleSci AI