A magnetron sputtering technique to prepare a-C:H films: Effect of substrate bias

Amorphous hydrogenated carbon (a-C:H) films were deposited by magnetron sputtering with a mixture gas of Ar and CH4. The a-C:H films deposited by this method have relatively low internal stress (<1 GPa) compared to some films deposited by conventional deposition process. The effects of substrate bias voltage on microstructure, surface morphology and mechanical properties of the films were investigated by various techniques. It has been found that the polymer-like structure is dominated at low bias voltage (−100 V), while the diamond-like structure with the highest hardness and internal stress is the main feature of the a-C:H films deposited under high bias voltage (−300 V). With increasing the bias voltage further, the feature of diamond-like structure decreases associating with the increase of graphitization. The frictional test shows that the friction coefficient and wear rate of the a-C:H films are depended strongly on structure and mechanical properties, which were ultimately influenced by the deposition method and bias voltage.