Recovery of hydrochloric acid using positively-charged nanofiltration membrane with selective acid permeability and acid resistance

An acid-recovering nanofiltration (NF) membrane with both acid resistance and selective acid permeability was fabricated via a water-based coating process for the recovery of hydrochloric acid. To achieve this, a thermally cross-linked branched-polyethyleneimine (b-PEI) layer was introduced to a loose polyethersulfone NF membrane by dip-coating of b-PEI and an epoxy linker and heat treatment in a sealed oven with a high-humidity atmosphere. The resulting membrane displayed a positive surface charge with a zeta potential, and exhibited a rejection performance order of MgCl2> MgSO4> NaCl > Na2SO4 characteristic of positive-charge-separation membranes. Mg rejection and Cl permeation experiments showed that the selective permeation of hydrochloric acid was achieved with Mg rejection above 95% and Cl permeation above 70%, and this allowed the acid to be recovered by obtaining permeate at the same pH as the feed. Moreover, the NF membrane maintained selective separation performance and flow rate for a month.