Facile fabrication of highly flexible, porous PEDOT:PSS/SWCNTs films for thermoelectric applications

High-performance organic composite thermoelectric (TE) materials are considered as a promising alternative for harvesting heat energy. Herein, composite films of poly (3,4-ethyienedioxythiophene):poly(styrene sulfonate)/single-walled carbon nanotubes (PEDOT:PSS/SWCNTs) were fabricated by utilizing a convenient solution mixing method. Thereafter, the as-prepared hybrid films were treated using sulfuric acid (H 2 SO 4 ) to further optimize the TE performance. Film morphological studies revealed that the sulfuric acid treated PEDOT:PSS/SWCNTs composite samples all possessed porous structures. Due to the successful fabrication of highly conductive networks, the porous nano-architecture also exhibited much more excellent TE properties when compared with the dense structure of the pristine samples. For the post-treated sample, a high power factor of 156.43 μW⋅m −1 ⋅K –2 can be achieved by adjusting the content of CNTs, which is approximately 3 orders of magnitude higher than that of the corresponding untreated samples (0.23 μW⋅m −1 ⋅K –2 ). Besides, the obtained films also showed excellent mechanical flexibility, owing to the porous nanostructure and the strong π – π interactions between the two components. This work indicates that the H 2 SO 4 treatment could be a promising strategy for fabricating highly-flexible and porous PEDOT:PSS/SWCNTs films with high TE performances.