Pressurized microwave-assisted hydrothermal treatment with various salts for efficient production of monosaccharides from rice straw

This study proposed a two-stage pressurized microwave hydrothermal treatment with a catalyst, followed by enzymatic saccharification, as a pretreatment method for efficiently converting cellulose and hemicellulose from rice straw into glucose and xylose. The use of various inorganic salts and dilute sulfuric acid as catalysts enhances sugar production. Using 1 wt% sulfuric acid as a catalyst at 150 °C for 5 min for the first-stage and then 180 °C for 5 min for the second-stage yielded the highest sugar production from rice straw compared with other inorganic salts tested. The filtrate and enzymatic saccharification solution contained a total sugar of 0.434 g/g-untreated rice straw (i.e. 0.302 g-glucose/g-untreated rice straw and 0.132 g-xylose/g-untreated rice straw). When inorganic salts such as NaCl, MgCl2, CaCl2, and FeCl3 were used as catalysts, the highest sugar yield of 0.414 g/g-untreated rice straw (i.e. 0.310 g-glucose/g-untreated rice straw and 0.104 g-xylose/g-untreated rice straw) was obtained when using 1 wt% FeCl3 at 170 °C for 5 min in the first-stage and 190 °C for 5 min in the second-stage, with a value close to that of 1 wt% sulfuric acid. These findings suggest that two-stage treatment with a catalyst is a suitable pretreatment method for the production of glucose and xylose from rice straw owing to the different hydrolysis temperatures of cellulose and hemicellulose.