Surface integrity and rolling contact fatigue behavior of 18CrNiMo7-6 steel subjected to ultrasonic surface rolling process

In this study, the effect of ultrasonic surface rolling process (USRP) on the surface integrity and rolling contact fatigue (RCF) behavior of 18CrNiMo7-6 steel have been conducted. The different static loads and ultrasonic amplitudes on surface morphology, surface roughness, microstructure, microhardness, and residual stress were examined. Results revealed that USRP treatment resulted in a remarkably smooth surface with the surface roughness value Ra of 0.035 μm. Moreover, USRP treatment induced the formation of nanocrystalline and ultrafine crystalline structures on the surface layer. Additionally, the sample surface was subjected to a significant layer of residual compressive stress, reaching a maximum value of approximately −1243 MPa and extending to a depth of around 1500 μm. The surface microhardness had been increased to 808 HV0.2. The comprehensive integration of grain refinement, the increase of surface microhardness, and the induction of residual compressive stress led to an improvement in RCF life.