Surgical Technique for High-Flow Internal Maxillary Artery to Middle Cerebral Artery Bypass Using a Superficial Temporal Artery Interposition Graft

Abstract BACKGROUND: Extracranial-to-intracranial high-flow bypass often requires cranial, cervical, and graft site incisions. The internal maxillary artery (IMA) has been proposed as a donor to decrease invasiveness, but its length is insufficient for direct intracranial bypass. We report interposition of a superficial temporal artery (STA) graft for high-flow IMA to middle cerebral artery (MCA) bypass using a middle fossa approach. OBJECTIVE: To assess the feasibility of an IMA–STA graft-MCA bypass using a new middle fossa approach. METHODS: Twelve specimens were studied. A 7.5-cm STA graft was obtained starting 1.5 cm below the zygomatic arch. The calibers of STA were measured. After a pterional craniotomy, the IMA was isolated inside the infratemporal fossa through a craniectomy within the lateral triangle (lateral to the posterolateral triangle) in the middle fossa and transposed for proximal end-to-end anastomosis to the STA. The Sylvian fissure was split exposing the insular segment of the MCA, and an STA-M2 end-to-side anastomosis was completed. Finally, the length of graft vessel was measured. RESULTS: Average diameters of the proximal and distal STA ends were 2.3 ± 0.2 and 2.0 ± 0.1 mm, respectively. At the anastomosis site, the diameter of the IMA was 2.4 ± 0.6 mm, and the MCA diameter was 2.3 ± 0.3 mm. The length of STA graft required was 56.0 ± 5.9 mm. CONCLUSION: The STA can be used as an interposition graft for high-flow IMA–MCA bypass if the STA is obtained 1.5 cm below the zygomatic arch and the IMA is harvested through the proposed approach. This procedure may provide an efficient and less invasive alternative for high-flow EC–IC bypass.