Effects of different oil fractions and tannic acid concentrations on konjac glucomannan-stabilized emulsions

Polysaccharide-stabilized emulsions have received extensive attention, but emulsifying activity of polysaccharides is poor. In this study, konjac glucomannan (KGM) and tannic acid (TA) complex (KGM-TA) was prepared via non-covalent binding to increase the polysaccharide interfacial stability. The emulsifying stabilities of KGM-TA complex-stabilized emulsions were analyzed under different TA concentrations and oil fractions. The results indicated that hydrogen bonds and hydrophobic bonds were the main binding forces for KGM-TA complex, which were closely related to TA concentrations. The interfacial tension of KGM-TA complex decreased from 20.0 mN/m to 13.4 mN/m with TA concentration increasing from 0 % to 0.3 %, indicating that TA improved the interfacial activity of KGM. Meanwhile, the contact angle of KGM-TA complex was closer to 90° with the increasing TA concentrations. The emulsifying stability of KGM-TA complex-stabilized emulsions increased in an oil mass fraction-dependent manner, reaching the maximum at 75 % oil mass fraction. Moreover, the droplet sizes of KGM-TA complex-stabilized high-internal-phase emulsions (HIPEs) decreased from 82.7 μm to 44.7 μm with TA concentration increasing from 0 to 0.3 %. Therefore, high TA concentrations were conducive to the improvement of the emulsifying stability of KGM-TA complex-stabilized HIPEs. High oil mass fraction promoted the interfacial contact of adjacent droplets, thus enhancing the non-covalent binding of KGM molecules at the interfaces with TA as bridges. Additionally, the high TA concentrations increased the gel network density in the aqueous phase, thus enhancing the emulsifying stability of emulsions. Our findings reveal the mechanisms by which polysaccharide-polyphenol complex stabilized HIPEs. Therefore, this study provides theoretical basis and references for the developments of polysaccharide emulsifier with high emulsifying capability and high-stability emulsions.