The optimized microbial-induced calcium carbonate precipitation process to fabricate underwater superoleophobic mesh for efficient oil-water separation

Microbial-induced calcium carbonate precipitation (MICP) is an environmentally-friendly and easy operation technique for separating oil-water mixtures. However, the effect of environmental factors on the wettability and oil-water separation performance of MICP remains unclear. In this study, three primary factors including mineralization solution (MS) concentration, bacterial suspension (BS) concentration, and temperature were carefully investigated. Under these varying conditions, stainless steel meshes (SSM) were chosen as the substrates for the growth of CaCO3 precipitations. Experimental results demonstrate a strong dependence of the morphology and wettability of CaCO3 precipitations on these factors. Higher MS concentration and temperature contribute to enhanced hydrophilicity of CaCO3 coatings due to the increased surface roughness. The water flux of MICP-coated SSMs decreases with the increase of BS concentration, MS concentration, and temperature. The MICP-coated SSM obtained with MS concentration of 0.15 M, BS concentration of 0.1 × 108 cells/mL, and mineralization reaction at 25 ℃ for 24 hours demonstrated the optimal comprehensive performance, exhibiting underwater superoleophobicity with an underwater oil contact angle (UWOCA) exceeding 151°, an ultra-high oil intrusion pressure (> 3.0 kPa), ultrahigh flux (28,644 L m−2 h−1), and a preferable oil rejection rate (> 99.9%). Additionally, the as-prepared mesh exhibited superior anti-oil-fouling property and reusability, while concurrently demonstrating excellent chemical and thermal stability. This work contributes to advancing our knowledge of the influence of various environmental factors on the wetting characteristics of MICP and provides a feasible solution for the highly efficient and low-cost preparation of oil-water separation membranes based on the MICP process.