Sustained-release of essential oils by polyvinyl alcohol-based nanofibers

Flavored cigarettes are very popular among consumers. However, many essential oils in cigarettes are lost during storage, and the utilization rate of the essential oils during use is low. Therefore, effective packaging and stable sustained release are urgently needed. In this study, a composite electrospun stable nanofiber storage material was prepared for sustained release. Polyethylene glycol, which has good heat storage properties, was selected as the heat storage material to inhibit the release of essential materials during storage. Porous graphene with good thermal conductivity and a porous structure was selected as the heat conductive component to ensure rapid and uniform release. Polyethylene glycol/porous graphene polyvinyl alcohol-mint essential oil sustained-release composite electrospun nanofibers membrane was prepared by electrospinning, and the morphology, composition, thermal properties, and sustained-release properties were tested. The results showed that the composite electrospun nanofiber membrane reduced the loss of mint oil during storage and enabled the rapid release of mint oil at high temperatures. At room temperature, the retention rate of the mint oil was still more than 90% after 120 h, and at a high temperature (75°C) the retention rate was less than 20% after 10 min; that is, 80% of the essential oil material was released within 10 min.