Optimized SnO2 preparation and coherent interlayers for enhanced charge dynamics and efficient perovskite photovoltaics

The dense, uniform and conformal electron transport layers (ETLs) will largely promote charge separation and extraction. Here, the mixed acid (hydrochloric acid and nitric acid) was used to regulate preparation process and enhance utilization of materials, and the colloids of tin oxide (SnO2) nanocrystals were prepared through hydrothermal process. The complete dissolution of Sn source can increase purity, produce homogeneous precursor, reduce grain sizes and improve film-coverage. As confirmed, a coherent interlayer at the SnO2 ETLs/perovskite interfaces will be achieved by coupling a Cl-bonded SnO2 film with a Cl-containing perovskite precursor. This thin coherent interlayer will largely reduce interface traps, enhance rapid carrier extraction, and impede charge recombination. The uniform polymer phase of (PEO)120-(PPO)30 will be used to passivate traps at the grain boundaries of perovskite films and further improve the photovoltaic performance. The maximum energy conversion efficiency (23.17%, a VOC of 1.153 V, a JSC of 24.75 mA cm−2 and a FF of 0.812) of perovskite solar cells was achieved. The charge separation, extraction, and recombination kinetics (charge dynamic process) was determined by the related characterization techniques. The functionalized SnO2-ETLs and formed coherent interlayer will provide a simple strategy to effectively decrease interface traps, enhance charge extraction, and facilitate development of perovskite solar cells.