Experimental and numerical investigation on the hydraulic design criteria for a step-pool nature-like fishway

Hydraulic considerations specific for the design of step-pool nature-like fishways (NLFs) are limited to the body dimensions of the target species. Additional hydraulic criteria for flow depth, maximum values for each of pool depth, velocity, and turbulent kinetic energy in terms of the weir opening width and discharge can help design an optimum step-pool NLF. The present study developed design charts and rating curves based on numerical modeling using the computational fluid dynamics software FLOW-3D ® HYDRO. Instantaneous velocity measurements on a 1:4 scaled physical model of a step-pool nature-like fishway designed as per the available design guidelines have been used to validate the numerical model. The hydrodynamics of the fishway with respect to the weir opening ratio b r (0.10, 0.25, 0.45, 0.65, and 1.00) and discharge Q (0.1–1.5 m 3 /s) was analyzed through numerical simulations on a prototype scale. The simulation results showed that the maximum flow velocity and the averaged velocity over the crest at b r = 0.10 and 0.25 are considerably lower than at b r > 0.25. The maximum turbulent kinetic energy and energy dissipation factors for the tested range of discharges were within recommended limits for b r = 0.10 and 0.25. The present study outcome in terms of the design charts and rating curves that illustrate the relationship between different variables can be used for an optimum design and ease in field implementation. In addition, the bed structure of the step-pool NLF presented in this study can be used to recreate full-scale or pilot models.