Study on Mechanisms for Improving Quality and Whiteness of Phosphogypsum Based on Process Mineralogy Analysis

Because of its low whiteness, complex composition, radioactivity and high impurity percentage, the usage of phosphogypsum (PG) resources is limited. A theoretical foundation for upgrading and bleaching PG can be obtained by researching the presence and status of impurities in the material and its symbiotic connection with gypsum. This paper makes use of an automatic mineral phase analyzer, optical microscope, XRF, XRD and SEM-EDS. After analyzing the chemical makeup of PG, phase composition and particle size composition, the distribution law and symbiotic interaction between impurities and gypsum in various particle sizes were discovered. Using a flotation test, the process mineralogy analysis results were confirmed. According to the XRF and XRD study results, the primary impurity elements in PG are Si, P and F. Si is more abundant in PG that is between +850 μm and −37.5 μm in size. The concentrations of gypsum and quartz in PG are 82.59% and 8.73%, respectively, according to the results of XRD and process mineralogy. The monomer dissociation degree of the gypsum mineral phase is as high as 90.47%. Gibbsite and pyrite are the primary causes of the low whiteness of PG and are clearly related to the quartz mineral phase. The coupling process of “flotation + pickling” produced purified PG with a purity of 95.35%, whiteness of 70.76% and SiO2 content of 2.73%. The quality met the first-class index standards of PG in GB/T23456-2018.