铁氧体(磁铁)
变形(气象学)
复合材料
复式(建筑)
电子背散射衍射
极限抗拉强度
相(物质)
加工硬化
作者
Hamidreza Farnoush,Amir Momeni,Kamran Dehghani,J. Aghazadeh Mohandesi,H. Keshmiri
标识
DOI:10.1016/j.matdes.2009.06.028
摘要
Abstract High temperature behavior of 2205 duplex stainless steel was studied by considering behavior of each constituent phase. The specimens were subjected to hot compression tests at temperatures of 800–1100 °C and strain rates ranging from 0.001 to 1 s−1 at intervals of an order of magnitude. The flow stress analysis showed that hot working empirical constants are different at low and high temperatures. The strain rate sensitivity m was determined and found to change from 0.12 to 0.21 for a temperature rise from 800 °C to 1100 °C. The apparent activation energy Q was calculated as 554 and 310 kJ/mol for low and high temperature, respectively. The validity of constitutive equation of hyperbolic sine function was studied and stress exponent, n, was assessed to be 4.2. Assuming the hyperbolic sine function for determination of strain rate and application of the rule of mixture, the interaction coefficients of δ-ferrite, P, and austenite, R, were estimated at different hot working regimes. It was found that the interaction coefficients are functions of Zener–Hollomon parameter Z and obey the formulas P = 1.4Z−0.08 and R = 0.76Z0.005. Therefore, it was concluded that at low Z values δ-ferrite almost accommodates strain and dynamic recovery is the prominent restoration process which may even inhibit dynamic recrystallization in austenite. Otherwise, at high Z, austenite controls the deformation mechanism of material and dynamic recrystallization leads in finer microstructure.
科研通智能强力驱动
Strongly Powered by AbleSci AI