脉冲(物理)
结构工程
参数统计
图表
机械
数学
工程类
物理
经典力学
统计
作者
Yanchao Shi,Hong Hao,Zhongxian Li
标识
DOI:10.1016/j.ijimpeng.2007.09.001
摘要
Pressure–impulse (P–I) diagrams are commonly used in the preliminary design or assessment of protective structures to establish safe response limits for given blast-loading scenarios. Current practice in generating the pressure–impulse diagram for structure components is primarily based on the simplified single degree of freedom (SDOF) model. The damage criterion is usually defined in terms of deformation or displacement response. Under blast loads, structures usually respond at their local modes, the equivalent SDOF system derived using the fundamental structure response mode might not be suitable. Moreover, structure is often damaged owing to brittle shear failure. In this case, the deformation-based damage criterion might not be able to give an accurate indication of local damage of a structural component. In this paper, a new damage criterion for RC column is defined based on the residual axial load-carrying capacity. A numerical method to generate pressure–impulse diagram for RC column is proposed. Parametric studies are carried out to investigate the effects of column dimension, concrete strength, longitudinal and transverse reinforcement ratio on the pressure–impulse diagram. Based on the numerical results, analytical formulae to predict the pressure–impulse diagram for RC column are derived. A case study shows that the proposed analytical formulae can be easily used to generate pressure–impulse diagram for RC columns accurately. The results are also compared with those obtained from the SDOF approach. It is shown that the proposed method gives better prediction of pressure–impulse diagram than the SDOF approach.
科研通智能强力驱动
Strongly Powered by AbleSci AI