PtCu Nanoparticle Catalyst for Electrocatalytic Glycerol Oxidation: How Does the PtCu Affect to Glycerol Oxidation Reaction Performance by Changing pH Conditions?

In this work, we show that finding and controlling optimum pH environments with Pt-based alloy catalysts can create high catalytic performances for electrocatalytic glycerol oxidation reaction (EGOR). Compared to a Pt/C catalyst, the PtCu/C alloy catalyst has higher reaction rate and turnover frequency (TOF) values by increasing the pH. Specifically, the reaction rate and TOF of the PtCu/C catalyst at pH 13 were 2.93 and 6.65 times higher than those of Pt/C, respectively. The PtCu/C catalyst also showed lower onset potential value and higher mass and specific activities than the Pt/C by increasing the pH. This indicates that the Cu in the PtCu alloy improves the catalytic activity for the EGOR in an OH− group-rich environment. In the case of the PtCu/C catalyst at a high pH condition, the selectivities of tartronic acid and oxalic acid tended to increase as the selectivity of lactic acid decreased. This result means that the PtCu alloy follows primary alcohol oxidation pathways, which are more favorable in an OH− group-rich environment than with only Pt. This study proposes that it is critical to optimize and control the reaction conditions for developing efficient EGOR catalysts.