Effect of Powder Feeding Rate on the Forming Quality of Alloy by Laser Melting Deposition

Abstract 12CrNi2 alloy steel was prepared by Laser Melting Deposition (LMD) technology, and the effect of powder feeding rate on surface quality, internal defects, microstructure, and microhardness of the single track and manufactured part were investigated. The results show that the metallurgical bonding of the single track deteriorates, the surface quality of the manufactured part is improved, the average microhardness of the manufactured part increases, and the number of pores first decreases and then increases with the increase of powder feeding rate. At the lower powder feeding rate, the manufactured parts have larger pore defects, while at the higher powder feeding rate, the manufactured parts have poor fusion defects. The main phase composition of the manufactured parts is ferrite(F), granular bainite (GB), and pearlite(P), and the manufactured part has finer grains at the higher powder feeding rate.