材料科学
同轴
陶瓷
壳体(结构)
芯(光纤)
复合材料
流量(数学)
机械工程
机械
工程类
物理
作者
Shengying Wu,Xiqing Xu,Yixian Wang,Pan Jiang,Jiayu Wu,Xin Jia,Desheng Liu,Xiaolong Wang,Zhongying Ji
标识
DOI:10.1016/j.ceramint.2024.01.280
摘要
Continuous-flow fixed-bed reactors (CFBR) have attracted considerable attention owing to their high efficiency and low energy consumption; however, the integrated fabrication of CFBR with core-shell structures remains a great challenge at present. Herein, a facile coaxial three-dimensional (3D) printing strategy was developed for the first time to rapidly and efficiently construct a CFBR with Al2O3 powder and aluminum dihydrogen phosphate (AP) as the outer shell ink, and Al2O3 powder, AP, and polymethyl methacrylate as the inner core ink that is extruded through a customized coaxial needle. Coaxial 3D printing realizes the integral fabrication of ceramic shells and inner porous ceramic carriers. CFBR with an outer wall thickness of 1.2 mm, core diameter of 3.7 mm, and variable length were fabricated, which were enabled with excellent catalytic properties by simply impregnating precious metal particles. The catalytic efficiencies for the reducing of 4-nitrophenol (4-NP) in the 3-cm-length Pd/CFBR, Pt/CFBR, and Ag/CFBR were found 96.9 %, 97.4 %, and 93 % after 10 min, respectively. Combining integrated fabrication, rapid prototyping, and complex architecture formation, coaxial 3D printing provides a novel strategy for directly integrating multifunctional CFBR.
科研通智能强力驱动
Strongly Powered by AbleSci AI