Microstructure Analysis and Preparation of Graphene Reinforced Aluminum Matrix Composites

Although many problems in aluminium matrix composites have been solved, there are still many difficulties and challenges that need to be solved. In this work, graphene reinforced aluminum matrix composites are prepared by hot isostatic pressing and vacuum sintering. The microstructures of composite powders and composites were studied by means of scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The effects of different ball milling parameters on the microstructures of composite powders were analyzed. The particle size of graphene coated aluminium composite powder increases with the increase of ball-to-material ratio. With the increase of milling time, graphene was gradually dispersed and coated on the aluminium powder particles, and the aluminium powder particles could be completely coated. with the increase of the speed, the large particles are extruded, sheared and the particles become smaller. The internal micro-deformation characteristics of graphene reinforced aluminium matrix composites were analyzed in detail.