The Effect of Preheating Temperature on the Corrosion Resistance and Porosity Defects Development Behaviour of Ni60A Coating

The laser cladding of nickel-based fusion alloys makes them prone to cracks and defects that affect the overall performance of the coating. In this study, Ni60A coatings were prepared at different preheating temperatures (25 °C, 200 °C, 400 °C and 600 °C). The effect of the preheating temperature of the substrate on the corrosion resistance of the coating as well as on the development of defects were investigated by electrochemical tests and immersion experiments in a 65 wt% H2SO4 solution at 60 °C. The results indicate that preheating the substrate to 200 °C can completely eliminate cracks in the coating and reduce porosity. Preheating leads to a decrease in the corrosion resistance of the coating. The size of the porosity defects is related to the law of longitudinal development of the defects. Porosity defects with diameters smaller than 100 μm have a more pronounced tendency to expand vertically than those with diameters larger than 100 μm.