Channel Selection for Stereo- Electroencephalography (SEEG)-Based Invasive Brain-Computer Interfaces Using Deep Learning Methods

Brain-computer interfaces (BCIs) can enable direct communication with assistive devices by recording and decoding signals from the brain. To achieve high performance, many electrodes will be used, such as the recently developed invasive BCIs with channel numbers up to hundreds or even thousands. For those high-throughput BCIs, channel selection is important to reduce signal redundancy and invasiveness while maintaining decoding performance. However, such endeavour is rarely reported for invasive BCIs, especially those using deep learning methods. Two deep learning-based methods, referred to as Gumbel and STG, were proposed in this paper. They were evaluated using the Stereo-electroencephalography (SEEG) signals, and compared with three other methods, including manual selection, mutual information-based method (MI), and all channels (all channels without selection). The task is to classify the SEEG signals into five movements using channels selected by each method. When 10 channels were selected, the mean classification accuracies using Gumbel, STG (referred to as STG-10), manual selection, and MI selection were 65%, 60%, 60%, and 47%, respectively, whilst the accuracy was 59% using all channels (no selection). In addition, an investigation of the selected channels showed that Gumbel and STG have successfully identified the pre-central and post-central areas, which are closely related to motor control. Both Gumbel and STG successfully selected the informative channels in SEEG recordings while maintaining decoding accuracy. This study enables future high-throughput BCIs using deep learning methods, to identify useful channels and reduce computing and wireless transmission pressure.