New Generation Aero Combustor

The purpose of this study is to identify the technology for next generation aero combustors, and to propose totally new combustor design approaches. Next generation aero combustors need very high combustion air fraction, that brings idle lean blow out (LBO) problem. The present study suggests several measures to solve this problem, including: pilot and main two concentric combustion zones with separation, aerodynamic design to have main air slipping by pilot combustion zones, etc. For high fuel air ratio (FAR) combustor, the present authors propose using angled main fuel co-axial air plain jet injection. Make use of different penetration to meet the need for low power and high power conditions. For low emissions combustor, the present authors use small scale close contact fuel-air mixing with fuel staging to have low emissions at the same time to have good idle, good high altitude ignition, etc. Brand new cooling designs are proposed for outliner and inner liner. This chapter is mainly a survey of present author’s own research. The results of this study will provide guideline for the development of next generation aero combustors.