Rapid preparation of nanocrystalline high-entropy alloy coating with extremely low dilution rate and excellent corrosion resistance via ultra-high-speed laser cladding

Ultra-high-speed laser cladding (UHSLC) not only offers an efficient solution to the limitations of conventional laser cladding but also aligns with the contemporary objectives of material conservation and efficiency enhancement in metal protective coatings. This study investigates the fabrication of CrFeCoNiMo0.2 high-entropy alloy (HEA) coatings using UHSLC and traditional laser cladding (TLC) methods. Key aspects such as macroscopic forming quality, element distribution, dilution rate, grain morphology, hardness, and electrochemical corrosion properties of both UHSLC and TLC coatings are thoroughly examined. Notably, UHSLC-produced coatings, with their significantly reduced thickness ranging from 100 to 300 μm, demonstrate an impressively low substrate dilution rate compared to the 2–3 mm thickness of TLC coatings. The rapid solidification inherent in UHSLC leads to smaller grain sizes in the coating, resulting in enhanced hardness. Moreover, the UHSLC coating exhibits superior corrosion resistance, characterized by a lower maintaining-passivity current density in 1 mol/L H2SO4 and a higher self-corrosion potential relative to TLC coatings. This work presents a novel approach, employing high-efficiency and low-cost laser-cladding technology, to minimize dilution in the matrix and improve the coating properties of HEAs.