Nanofiber membranes immobilized with in-situ grown nanoparticles for enhanced wetting resistance in direct contact membrane distillation

Immobilizing nanoparticles (NPs) onto the hydrophobic nanofiber membrane surface is an effective method to enhance its resistance to pore wetting in membrane distillation (MD) due to construction of a hierarchical structure. However, loading NPs onto the fabricated membrane through post-treatment techniques (e.g., electrospray, physical vapor deposition etc.) results in agglomeration of NPs and their weak attachment with membrane surface. To address this issue, we utilize precipitation and crystallization methods to achieve in-situ growth of zinc oxide (ZnO) NPs onto nanofiber surface for intensifying their interaction. Morphological characterization demonstrated that the size and amount of in-situ grown ZnO NPs could be controlled by varying reaction time and concentration of precipitation agent. Furthermore, the resultant nanofiber membrane with higher contact angles (163°) showed stable water flux and effective salt rejection in presence of surfactant and oil. Finally, the kinetics of wetting progression monitored by ultrasonic time-domain reflectometry (UTDR) further confirmed that the early partial wetting induced by surfactants was significantly restrained owing to the hierarchical structure generated by the in-situ grown ZnO NPs. This study suggested the modified nanofiber membrane presented outstanding wetting resistance to low-surface-tension foulants and promise for desalination in MD.