烧结
扫描电子显微镜
膜
膨润土
化学工程
多孔性
相位反转
化学
陶瓷
分散剂
材料科学
复合材料
色散(光学)
生物化学
光学
物理
工程类
作者
Yusuf Olabode Raji,Mohd Hafiz Dzarfan Othman,Nik Abdul Hadi Md Nordin,Zhong ShengTai,Jamilu Usman,Stanley Chinedu Mamah,Ahmad Fauzi Ismail,Mukhlis A. Rahman,Juhana Jaafar
标识
DOI:10.1016/j.arabjc.2020.05.001
摘要
In this study, low-cost magnesium bentonite (MB) was used for the fabrication of bentonite hollow fibre (BHF) membrane with high pure water flux. MB powder was initially characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), particle size distribution (PSD) analyser, Brunnauer -Emmett- Teller (BET) method, and field emission scanning electron microscope (FESEM). The BHF membrane obtained was then fabricated through dope suspension mixing, phase inversion and sintering process. The dope suspension was prepared by mixing MB, dispersant, polymer binder, and solvent using a planetary ball mill. While the spinning process was carried out at the extrusion rate of 8 mL/min, a fluid bore rate of 10 mL/min and air gap of 5 cm, and this was followed by sintering operation at 950 °C, 1000 °C, 1050 °C, and 1100 °C. The resulting BHF membrane was characterized by scanning electron microscopy (SEM) and XRD; the porosity test, water flux and oil rejection were also examined. The SEM surface morphology of BHF at sintering temperature of 950 °C showed spongy-like and nested macrovoids structure; the porosity was 49.09% with a mean pore size of 3.9 µm. The performance test on the bentonite-based hollow fibre membrane showed that the membrane prepared at 20 wt% and sintering temperature of 1000 °C, which induced high and stable permeate water flux and oil rejection of BHFC membrane were 544 L/m2 h and 97%, respectively. The results have shown that the presence of magnesium in bentonite can enhance and promote the needed support material for the fabrication of hollow fibre ceramic membrane.
科研通智能强力驱动
Strongly Powered by AbleSci AI