Risk of penetration of the baseplate peg in reverse total shoulder arthroplasty for an Asian population

PurposeBaseplate positioning may affect clinical outcome after reverse total shoulder arthroplasty (RTSA). The aim of this study was to evaluate the risk of penetration of the baseplate peg in RTSA.MethodsForty-four patients with rotator cuff arthropathy or massive rotator cuff tears were included. Using their computed tomography data, ten insertion patterns of the baseplate pegs were simulated. First, in the axial plane, the baseplate was placed perpendicular to the Friedman axis (Friedman placement) and parallel to the glenoid surface (glenoid placement). Second, each of these placements were classified into the following groups: The baseplate peg was placed 2 mm anterior to the long axis of the glenoid (group A2), 1 mm anterior (group A1), on the long axis (group C0), 1 mm posterior (group P1), and 2 mm posterior (group P2). Cases in which the baseplate peg was within the scapular neck were defined as non-penetration, and the non-penetration rates among each group were evaluated and compared between sexes, and their relationship with patient height was evaluated.ResultsIn both the Friedman and glenoid placements, the non-penetration rate was significantly higher in groups A2 (68.2% and 70.5%) and A1 (65.9% and 65.9%) compared with groups P1 (18.2% and 29.5%) and P2 (9.1% and 13.6%; p < 0.001) and in males than in females (p < 0.05). Furthermore, the non-penetration rate tended to be higher as the patient’s height increased.ConclusionsIt is recommended that the baseplate peg be placed anterior to the long axis of the glenoid.