材料科学
涂层
正硅酸乙酯
透射率
沉积(地质)
超疏水涂料
光伏系统
可见光谱
复合材料
化学工程
纳米技术
光电子学
古生物学
生态学
沉积物
工程类
生物
作者
Jiehong Wang,Kangning Li,Jing Zhang,Jie Feng
标识
DOI:10.1016/j.porgcoat.2023.107679
摘要
Dust deposition on photovoltaic (PV) modules obviously affects power generation efficiency. In order to solve this problem, a fluorinated hydroxyacrylate emulsion (FHA)/SiO2 nanoparticles coating with superhydrophobic (SH) surface and visible light transmittance greater than 93 % has been prepared. A silica sol obtained by hydrolysis of tetraethyl orthosilicate (TEOS) is used to cross-link FHA chains, resulting in a significant increase in the SH stability of the SH coating. An FHA hydrophobic coating with smooth surface was also prepared as a control sample. Both anti-soiling and dust removal performances of these two types of coatings were studied. The results show that both the hydrophobic coating and the SH coating have better anti-soiling and dust removal performances compared with bare glass. Among them, the SH coating exhibits better performance. The SH coating loses its SH property after being placed outdoors due to dust deposition. However, washing with water can remove most of the dust and restore its SH property. Moreover, the SH coating shows excellent self-cleaning properties when placed outdoors under low precipitation or light rain. In addition, the SH coating also shows good resistance to the impact of sand and water drops. This simple method of preparing SH coatings is expected to find use in the field of photovoltaic modules.
科研通智能强力驱动
Strongly Powered by AbleSci AI