Heavy metal pollution by road-deposited sediments and its contribution to total suspended solids in rainfall runoff from intensive industrial areas

Understanding the relationship between road-deposited sediments (RDS) and total suspended solids (TSS) is essential for managing non-point pollution. Studying the heavy metal concentrations of RDS and TSS in rainfall is important to the development of RDS management strategies and to the design of effective stormwater management practices. We investigated the heavy metal (V, Cr, Mn, Co, Ni, Cu, Zn, As, Mo, Cd, Sn, Pb) in RDS and TSS in rainfall runoff to assess the metal pollution level and to evaluate the contribution of RDS heavy metal pollution in the TSS. The heavy metal pollution in RDS and TSS in industrial areas was relatively higher in small particles (<125 μm), while TSS had a higher heavy metal concentration than RDS. In addition, the concentration of heavy metals in TSS increased rapidly during the initial rainfall. The amount of particles larger than 125 μm also increased, suggesting that large metal particles accumulated in industrial areas were also discharged in the form of non-point pollution. The amount of RDS per unit of industrial area (g/m2) and the accumulation of heavy metals (Pb, Cu, and Zn) (mg/m2) were 15- and 8-54-fold higher than those of urban areas, respectively. Considering particles <125 μm, which can be easily transported or discharged during rainfall, the contribution rate of RDS to TSS was 41.3%, but the average contribution rate to heavy metals in TSS was 22.1%. The average load of heavy metals from industrial areas in TSS was 77.9%. The load of Cu, Ni, As, Cd, and Sn exceeded 90%, indicating that most of these metals were attributed to industrial activities related to metal processing. Our results suggest the importance of efficient road cleaning and rainfall runoff management strategies to solve the heavy metal pollution problem caused by non-point sources in industrial areas.