Green preparation of 3D micronetwork eugenol-encapsuled porous starch for improving the performance of starch-based antibacterial film

In order to find a non-enzymatically treated alternative wall material with effective encapsulation properties, and to reduce the use of conventional non-biodegradable plastics, a novel 3D-micronetwork porous starch (3D-MPS) was created via a modified sacrificial template method to encapsulate eugenol (3D-EMPS) and used to incorporate with TiO2-starch film, for significantly improving the performance of starch-based antibacterial film. At the template SiO2 nanoparticles concentration of 0.1 %, the 3D-MPS exhibited anticipated alveolate structure with internal aperture of approximately 10 μm confirmed by SEM. With addition of 3D-EMPS, higher tensile strength (29.70 Mpa) and water barrier property (924 g/cm2·24 h) of the composite film was obtained. Moreover, molecular docking technique was used to model the intermolecular forces, which showed that the major forces maintaining the internal bonding of the composite film were hydrogen bonding and the interaction between eugenol and 3D-MPS skeleton in 3D-EMPS. Meanwhile, the composite film demonstrated the expected eugenol retardation and antimicrobial capacity against S. aureus, E. coli, and B. subtilis. Finally, the composite films were used for evaluating the feasibility in the actual food, which largely extended its shelf life compared to the negative control. This high-performance film revealed their potential for packaging materials application.