Enhancing Thermal Conductivity of Phase Change Materials Using Nanomaterials and its Effectiveness in Cooling Solar Cells

The latent heat storage system is considered the most promising technology in thermal energy storage (TES) because of its many advantages. This technique uses phase change material (PCM) as a TES medium. However, the low thermal conductivity (TC) of PCM is the major drawback of the system. Previous studies have shown that the addition of nanomaterials to PCM generally increases its TC. On the other hand, researchers tend to study the possibility of using enhanced PCM to cool solar cells. In fact, raising the solar cell’s operating temperature negatively impacts its efficiency. This problem is considered one of the biggest problems in solar energy systems, and researchers are still working to solve it. This paper focused on the possibility of enhancing the TC of paraffin by adding different shapes of silver nanomaterials to it (silver nanoparticles, silver nanowires and nanohybrid with silver nanoparticles and silver nanowires). Nanomaterials were added at volume fractions of 0.5% and 1%. Then, the study examined the ability to use this improved material to reduce the temperature of solar cells. We used the “Solidworks” program to create a 3D system, and then we used the “Ansys Fluent” software to simulate five cases; PV without PCM, PV with PCM, PV with PCM enhanced by nanoparticles, PV with PCM enhanced by nanowires, PV with PCM enhanced by nanohybrid (a mixture of nanoparticles and nanowires). The results show that using PCM enhanced by nanowire at a volume fraction of 0.5% gave the best results in decreasing the temperature of PV. The average temperature of PV declined by 14.9[Formula: see text]. In addition, the efficiency of PV rose by about 7.6%. Followed by using PCM enhanced by nanoparticles at a volume fraction of 1%. The average temperature of PV declined by 12.9[Formula: see text]. Moreover, the efficiency of PV rose by about 6.6%.