Tailoring the catalytic microenvironment of CuO with hydrophobic CuSA2 for selective CO2 electroreduction to C2+ products

Advancing the Faraday efficiency (FE) and current density of Cu catalyzed electrochemical CO2 reduction (ECR) reaction to produce C2+ products is important for its practical applications. Constructing a hydrophobic interface to regulate the local reaction environment is an effective method to improve the selectivity of C2+ products, but it is limited by the low reaction current density. In this work, we fabricated a novel hydrophobic and ECR active copper stearate (CuSA2) decorated CuO nanoparticle catalyst (CuO/CuSA2) for ECR reaction toward C2+ products. As a result, the CuO/CuSA2 catalyst achieved an FE of 61.33 % and a partial current density of 429.33 mA cm−2 for C2+ products. The CuSA2 and CuO nanoparticle cooperate very well for the formation of C2+ products. The in-situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) and electrochemical adsorption experiments indicated that the hydrophobic CuSA2 regulated the local ECR reaction environment. The local ∗CO2.- and *CO adsorption were strengthened by hydrophobic CuSA2 modification while the H2O adsorption was inhibited. CuO nanoparticle promotes *CO coupling reaction and enhances C2 intermediates (*OCCOH and *OC2H5) adsorption. Hydrophobic CuSA2 and CuO nanoparticle synergistically promote the generation of C2+ products. This work provides new insights into the design of hydrophobic CO2 reduction electrocatalysts for the preparation of C2+ products.