Poly(ε‐caprolactone) Biomaterial Sterilized by E‐Beam Irradiation

Abstract Summary: The effects of ionizing radiation (electron beam) on poly( ε ‐caprolactone) (PCL) were studied by analyzing changes in viscosity‐average and weight‐average molecular weight and radius of gyration, and by performing sol‐gel analysis and swelling tests. Samples were irradiated under various conditions: solid and molten PCL in the presence or absence of air. The overall efficiency of crosslinking is higher for samples irradiated in the molten state than in the solid state, and is reduced in the presence of oxygen. Based on three kinds of experiments (molecular weight dependence on the dose in the pre‐gelation region, sol‐gel analysis, and swelling study), radiation‐chemical yields of intermolecular crosslinking and scission were determined and are discussed in terms of the mechanism of radiation‐induced reactions in PCL. Properties of the gels formed by high‐dose irradiation and mechanical properties of irradiated PCL were analyzed. Irradiation causes an increase in the compression modulus of PCL. This process occurs at the pre‐gelation stage and continues in the gel‐containing system. We have demonstrated, for the first time, that irradiation of solid PCL is accompanied by a pronounced post‐effect, which manifests itself by changes in the average molecular weight. EPR data indicate that this effect, at least in part, is caused by the presence of long‐lived radicals trapped in the crystalline regions. Irradiation with the sterilizing dose does not cause a statistically significant change in the biocompatibility of PCL after subsequent storage for 79 d, as determined by preliminary osteoblast vitality tests. Changes in the molecular weight upon irradiation and subsequent storage of poly( ε ‐caprolactone). image Changes in the molecular weight upon irradiation and subsequent storage of poly( ε ‐caprolactone).