数字图像相关
材料科学
拉挤
残余应力
复合材料
横截面
有限元法
复合数
纤维增强塑料
张力(地质)
结构工程
极限抗拉强度
工程类
作者
Onur Yuksel,İsmet Baran,Nuri Ersoy,Remko Akkerman
标识
DOI:10.1016/j.compstruct.2019.110954
摘要
Process induced residual stresses are one of the main sources of defects such as (pre) mature matrix cracking during pultrusion of fiber reinforced polymer composite profiles. Recently, comprehensive process models have been developed to understand and describe the underlying mechanisms of the residual stresses in pultrusion processes. The predicted stresses however have not been validated with experimental measurements which are necessary to verify the implemented material models and assumptions in the process models. A hole drilling method with digital image correlation (DIC) is used in the present work to measure the transverse strain relaxation due to material removal in a pultruded thick composite profile (20 × 20 mm) made of unidirectional glass/polyester. The corresponding residual stress state is back calculated using the measured strains in a finite element based numerical model. The estimated level of transverse residual stress in the core of the profile was found to be 6.1 MPa in tension.
科研通智能强力驱动
Strongly Powered by AbleSci AI