Barium alginate as a skeleton coating graphene oxide and bentonite-derived composites: Excellent adsorbent based on predictive design for the enhanced adsorption of methylene blue

The phenomenon that calcium alginate does not exhibit high adsorption capacity as a carrier material has not been reasonably explained or solved. In this paper, a new viewpoint that the orbital energy level of metal ions and the binding degree of the α-l-guluronate and β-d-mannuronate units affect the adsorption performance of the composite was innovatively proposed. Taking barium alginate (BA) as an example, the possibility of replacing calcium alginate is discussed. Barium alginate/graphene oxide (BA/GO) membranes and three-dimensional (3D) barium alginate-bentonite-graphene oxide derived (3D-BA) hydrogels were prepared by vacuum freeze-drying to remove methylene blue. The structure and morphology of the prepared adsorbents were characterized by scanning electron microscopy, X-ray photoelectron spectroscopy, thermogravimetry and Fourier transform infrared spectroscopy. The effects of adsorbent dosage, doping ratio, temperature, contact time, pH value and initial dye concentration on the adsorption performance of BA composites were investigated. The adsorption capacities of the BA/GO and 3D-BA materials were 1011.3 and 710.3 mg/g, respectively. The BA/GO membrane exhibited stable filtration performance against high concentrations of dyes. Benefiting from the strong interaction between bentonite, sodium alginate and Ba2+, the 3D-BA hydrogel showed higher thermal stability and better adsorption efficiency than other materials. The Elovich kinetic model and Sips equation can appropriately describe the adsorption process. The results show that barium alginate is a better carrier material than calcium alginate.