材料科学
涂层
表面张力
润湿
流变学
复合材料
丙烯酸酯
粉末涂料
化学工程
二氧化硅
吸附
聚合物
有机化学
化学
共聚物
工程类
物理
量子力学
作者
Volodymyr Gots,Oles Lastivka,Oksana Berdnyk,Oleksandr Tomin
出处
期刊:IOP conference series
[IOP Publishing]
日期:2021-06-01
卷期号:1164 (1): 012044-012044
标识
DOI:10.1088/1757-899x/1164/1/012044
摘要
Abstract The study deals influence of modifying additives on properties of the powder coating. The authors Using rheological and degassing modifying additives with different nature of the main active substance. It was found that the additives based on the acrylate polymer adsorbed on the silicon dioxide in the form of Byk-3900P and on the polyoxyethylene derivative of the castor oil in the form of Luvotix R400 decreasing the surface tension in the coating film, which, in its turn, contributes to the increase in the wettability of base during the melting of the powder coating, decrease the ‘orange peel’ effect during the cross-linking, reduction in pinholes on the obtained surface and improvement of mechanical characteristics of the coating. At the same time, rheological additives based on the bentonite in the form of Luvogel 4B and on the hydrophilic silicon dioxide in the form of Cab-o-sil M5 cause the increase in the surface tension in the coating film, which, in its turn, leads to the worsening of flow, appearance and mechanical characteristics of the powder coating.
科研通智能强力驱动
Strongly Powered by AbleSci AI