Effect of applied voltage on jet electric current and flow rate in electrospinning of polyacrylonitrile solutions

Abstract BACKGROUND: In the electrospinning process, through subjecting a pendent drop of a polymer solution to a high electric field, a fluid jet is ejected from the drop. To have a stable process, the rate at which the fluid is forced into the drop and the rate at which the fluid is carried away by the jet must be equal. A method is reported to find the point at which the flow into the drop is equal to the flow out of the drop. RESULTS: In the electrospinning of polyacrylonitrile solutions, by applying different voltages at a constant solution feed rate, two jet regimes were observed: stable jet and fluctuating jet regimes. The stable jet regime occurred at low voltages where the jet flow rate was lower than the feed rate, and the fluctuating jet regime occurred at higher voltages where the jet flow rate exceeded the feed rate. The highest voltage in the stable jet regime was the point where the jet flow rate was equal to the feed rate. This point was determined for different feed rates. CONCLUSION: By applying various voltages at different feed rates, and investigating the jet current, a curve showing stable processing points can be obtained. Copyright © 2008 Society of Chemical Industry