材料科学
电极
合金
弧(几何)
冶金
金属
相(物质)
复合材料
分析化学(期刊)
机械工程
化学
色谱法
工程类
物理化学
有机化学
作者
Yuwen Wang,Ji Chen,Maoai Chen,Hao Su,Wenbin Zhang,Wu Chen
标识
DOI:10.1080/13621718.2022.2162712
摘要
The influence of electrode positive/electrode negative (EP/EN) ratio on cold metal transfer advance-based wire arc additive manufacturing (WAAM) process for Al–Zn–Mg–Cu alloy was studied in this paper. The process stability was investigated via analysing electrical waveforms and arc/metal transfer images concurrently. A high EP/EN ratio (≥ 13:7) was beneficial to decrease abnormal long wait phase duration of current and spatter of droplet, which improved the stability of WAAM process. The forming accuracies of the samples increased first and then decreased with the increase of EP/EN ratio due to the incompatibility of the heat input and molten pool flow. The average width and effective width coefficient showed a positive correlation with EP/EN ratio.
科研通智能强力驱动
Strongly Powered by AbleSci AI