Effect of Ti0.9Zr0.1Mn1.5V0.3 alloy catalyst on hydrogen storage kinetics and cycling stability of magnesium hydride

As a high-capacity hydrogen storage material, MgH2 still has the problem of high operating temperature and slow reaction kinetics. In this work, an TiMn2-based Laves phase alloy (Ti0.9Zr0.1Mn1.5V0.3, denoted as Ti–Mn) was first synthesized by arc melting and then employed to regulate the hydrogen storage properties of MgH2, with the carbon nanotubes (CNTs) as an aid agent to facilitate the hydrogen diffusion and heat transfer. It was shown that the introduction of Ti–Mn/CNTs can remarkably improve the hydrogen storage properties of MgH2. The MgH2 + 10 wt% Ti–Mn + 1 wt% CNTs composite has an initial dehydrogenation temperature of 195 °C and can absorb hydrogen at room temperature. As for the kinetics, it can release 6.1 wt% H2 in 5 min at 300 °C, and absorb 4.8 wt% H2 in 10 min at 150 °C. It still has a reversible capacity of 6.2 wt% after 100 cycles. Combination of Ti–Mn alloy and CNTs is more effective than Ti–Mn alloy or CNTs alone for regulating MgH2. Ti–Mn/CNTs does not alter the overall thermodynamics of MgH2. However, local destabilization of Mg–H bonds induced by the MgH2/Ti–Mn interfaces was observed experimentally and confirmed theoretically, which partially contributes to the enhanced hydrogen storage of MgH2. In addition, the active transition metals contained in the alloy was believed to accelerate the hydrogen dissociation and delivery during the hydrogen storage process. This work not only achieves the synergistic improvement of hydrogen storage of MgH2 by combination of Ti–Mn alloy and CNTs, but also presents the local destabilization mechanism to explain the improved hydrogen storage of MgH2 by Ti–Mn alloy experimentally and theoretically.