Effect of mixing iron-containing sludge to domestic wastewater on wastewater characteristics under different conditions: types of domestic wastewater, varying pH and mixing ratios

Large volumes of iron-containing sludge (Fe-Sludge) would be generated with the application of iron salts in drinking water treatment plants, which must be disposed appropriately. One of the common disposal solutions for Fe-Sludge is through direct disposal into the municipal sewer system, whereby it would be mixed with domestic wastewater and treated in the wastewater treatment plant. To better understand the properties of Fe-Sludge and the effect of dosing Fe-Sludge to the real domestic wastewater (WW) on the wastewater characteristics, a serial batch tests were conducted on a local wastewater reclamation plant (WRP). It was found that the impact of dosing Fe-Sludge at a Fe/P ratio of 5 did not vary with the types of WW, i.e., filtered or non-filtered by the 5 mm screen. In addition, the soluble organic, phosphate and total soluble iron concentrations mostly decreased with the dosing of Fe-Sludge within the dosage range of 0-5 (Fe/P ratio). In contrast, the suspended solid (SS) and volatile suspended solid (VSS) concentrations increased with the dosage of Fe-Sludge within the dosage range of 0-5 (Fe/P ratio). Furthermore, the pH condition of the domestic wastewater affected the phosphate removal efficiency by Fe-Sludge and influenced the total soluble iron concentration and iron species distribution. These findings will provide fundamental support for the further study of the effect of Fe-Sludge on the biological treatment performance and membrane filtration performance of the membrane bioreactor (MBR) system.