Damage constitutive model of polypropylene-fibre-reinforced recycled aggregate concrete

Adding polypropylene fibre (PPF) to recycled aggregate concrete (RAC) not only improves performance but also has economic benefits. The effects of single-blend and double-blend micro- and macro-PPFs in RAC specimens were studied. Micro- and macro-PPFs were used to design and produce 30 groups of PPF-reinforced RAC specimens with 0%, 25% and 50% coarse aggregate (CA) substitution rates. Controlling the fibre mixing proportions, the stress–strain curve, elastic modulus, peak strength, peak strain and acoustic emission amplitude–frequency extremum (AFE) of each group of specimens were obtained. The elastic modulus and peak stress of specimens without PPFs decreases gradually with an increase of the CA substitution rate. However, there was a certain increase in elastic modulus and peak stress when PPFs were added. A damage constitutive model for PPF-reinforced RAC was established. By fitting this model, it was found that although the elastic modulus and peak stress of the RAC specimens increased by a certain extent, the fitting parameters of RAC were greater than those of ordinary concrete and the RAC post-peak strength was lower. The evolution law of acoustic emission AFE of PPF-reinforced RAC was studied. It was found that the cumulative AFE of RAC with PPF was larger, indicating that the PPFs limited crack propagation and increased the fracture energy.