Combinatorial Screening of Cu–W Oxide-Based Photoanodes for Photoelectrochemical Water Splitting

Metal oxide libraries for photoanodes for the oxygen evolution reaction (OER) were generated by printing a metal salt solution in an array layout, followed by calcination to yield 22 ternary metal oxide systems. The libraries included a ternary metal cation system based on CuWO4 with one out of eight transition or posttransition metal ions Cr, Mn, Fe, Co, Ni, Zn, Bi, and Ga in different overall atomic ratios. The photocatalyst libraries were screened by scanning photoelectrochemical microscopy for the highest anodic photocurrents. Array elements that showed promising performance were printed in another set of eight libraries with smaller increments of overall composition. Improved performance with respect to CuWO4 was found for Ga, Co, and Ni as the third element. A comparison of the most active composition of those arrays within one library showed the highest activity for Cu48Ga3W49Ox. Printing spots of identical composition (Cu48Ga3W49Ox, Cu44Ni9W47Ox, and Cu44Co9W47Ox) over a larger area facilitated further characterization by X-ray photoelectron spectroscopy ultraviolet photoelectron spectroscopy (UPS), X-ray diffraction, scanning electron microscopy, chopped light voltammetry, and scanning electrochemical microscopy for the OER. High and stable steady-state photocurrents were generated in a photoelectrochemical cell for all three electrodes even at a low constant bias voltage. The best overall photoanode composition Cu48Ga3W49Ox showed currents that were 36 times higher than the currents of the binary Cu50W50Ox system. Significant n-doping was found by UPS valence band spectra for Ga-containing materials.