电解质
材料科学
固体氧化物燃料电池
离子电导率
电化学
介电谱
氧化物
电导率
化学工程
X射线光电子能谱
傅里叶变换红外光谱
阳极
无机化学
分析化学(期刊)
化学
电极
物理化学
冶金
工程类
色谱法
作者
Gang Chen,Yadan Luo,Wenkang Sun,Hailiang Liu,Yushi Ding,Ying Li,Shujiang Geng,Kai Yu,Guoqiang Liu
标识
DOI:10.1016/j.ijhydene.2018.04.006
摘要
A symmetrical solid oxide fuel cell (SOFC) with a novel microstructure of BaZr0.9Y0.1O3–δ (BZY) as the electrolyte is investigated in this study. The cell with the Ni0.8Co0.15Al0.05LiO2 (NCAL)-foam Ni/BZY/foam Ni-NCAL structure is prepared by a co-pressing method. The maximum obtained power density is 735.6 mW cm−2 in H2 at 550 °C, which is comparable to the results obtained using Ni cermet anode-supported SOFCs with an extremely thin electrolyte. The ionic conductivity of the BZY electrolyte prepared in this study is much higher than that of the conventional BZY electrolyte. The activation energy of ionic conduction is much lower than that of traditional oxygen ion or proton conduction. Electrochemical impedance spectra (EIS) results of the cell with the BZY electrolyte measured in different atmospheric conditions and the results of oxygen ion filtration experiments for the cell using the BZY/Ce0.9Gd0.1O2 (GDC) bilayer electrolyte indicate that oxygen ion is one of the carriers in the BZY electrolyte prepared in this study. According to the results of X-ray photoelectron spectroscopy (XPS) and Fourier Transform infrared spectroscopy (FTIR), an interfacial O2− conduction mechanism at the interface of BZY particles in the electrolyte is discussed.
科研通智能强力驱动
Strongly Powered by AbleSci AI