Potential of sodium chloride solution as mixing water in calcium aluminate cement modified with siliceous minerals

Calcium aluminate cement (CAC) is advantageous in marine engineering, and using materials directly from the sea when mixing CAC can reduce both construction costs and ecological pollution to the sea. However, using seawater as the mixing water in CAC is difficult due to the strength reduction. In this work, CACs were prepared with siliceous minerals (SMs) (diatomite and silica fume (SF)) and sodium chloride solution (SCS) as the mixing water. For comparison, other samples were immersed in SCS rather than mixed with SCS. The strength, mass and length changes of CAC mortars cured at 20°C and 40°C were determined. The phase assemblages and morphology were assessed using X-ray diffraction, thermogravimetric-differential scanning calorimetry and scanning electron microscopy. Using SCS as the mixing water was beneficial to the later strength development of CAC. It promoted the formation of C 2 ASH 8 in CAC pastes and showed no strength loss even when cured at 40°C. The strengths of the SM-modified CAC mortars mixed with SCS were higher than those immersed in SCS. The combination of diatomite and SCS significantly increased the CAC strength, especially at 20°C, while SF contributed to better stability in mass and length.