Peterson's Stress Concentration Factors

Index to the Stress Concentration Factors. Preface for the Third Edition. Preface for the Second Edition. 1. Definitions and Design Relations. 1.1 Notation. 1.2 Stress Concentration. 1.3 Stress Concentration as a Two-Dimensional Problem. 1.4 Stress Concentration as a Three-Dimensional Problem. 1.5 Plane and Axisymmetric Problems. 1.6 Local and Nonlocal Stress Concentration. 1.7 Multiple Stress Concentration. 1.8 Theories of Strength and Failure. 1.9 Notch Sensitivity. 1.10 Design Relations For Static Stress. 1.11 Design Relations for Alternating Stress. 1.12 Design Relations for Combined Alternating and Static Stresses. 1.13 Limited Number of Cycles of Alternating Stress. 1.14 Stress Concentration Factors and Stress Intensity Factors. References 2. Notches and Grooves. 2.1 Notation. 2.2 Stress Concentration Factors. 2.3 Notches in Tension. 2.4 Depressions in Tension. 2.5 Grooves in Tension. 2.6 Bending of Thin Beams with Notches. 2.7 Bending of Plates with Notches. 2.8 Bending of Solids with Grooves. 2.9 Direct Shear and Torsion. 2.10 Test Specimen Design for Maximum Kt for a Given r D or r H 76. References. Charts. 3. Shoulder Fillets. 3.1 Notation. 3.2 Stress Concentration Factors. 3.3 Tension (Axial Loading). 3.4 Bending. 3.5 Torsion. 3.6 Methods of Reducing Stress Concentration at a Shoulder. References. Charts. 4. Holes. 4.1 Notation. 4.2 Stress Concentration Factors. 4.3 Circular Holes with In-Plane Stresses. 4.4 Elliptical Holes in Tension. 4.5 Various Configurations with In-Plane Stresses. 4.6 Holes in Thick Elements. 4.7 Orthotropic Thin Members. 4.8 Bending. 4.9 Shear and Torsion. 5. Miscellaneous Design Elements. 5.1 Notation. 5.2 Shaft with Keyseat. 5.3 Splined Shaft in Torsion. 5.4 Gear Teeth. 5.5 Press- or Shrink-Fitted Members. 5.6 Bolt and Nut. 5.7 Bolt Head,Turbine-Blade, orCompressor-Blade Fastening (T-Head). 5.8 Lug Joint. 5.8.1 Lugs with h d 0 . 5. 5.8.2 Lugs with h d 0 . 5. 5.9 Curved Bar. 5.10 Helical Spring. 5.10.1 Round or Square Wire Compression or Tension Spring. 5.10.2 Rectangular Wire Compression or Tension Spring. 5.10.3 Helical Torsion Spring. 5.11 Crankshaft. 5.12 Crane Hook. 5.13 U-Shaped Member. 5.14 Angle and Box Sections. 5.15 Cylindrical Pressure Vessel with Torispherical Ends. 5.16 Tubular Joints. References. Charts. 6. Stress Concentration Analysis and Design. 6.1 Computational Methods. 6.2 Finite Element Analysis. 6.3 Design Sensitivity Analysis. 6.4 Design Modification. Index.