Study on the Superhydrophobic Properties of an Epoxy Resin-Hydrogenated Silicone Oil Bulk Material Prepared by Sol-Gel Methods

A superhydrophobic material was prepared by a simple and easily accessed sol-gel method using epoxy resin (E-51) and γ-aminopropyltriethoxysilane (KH-550) as the precursors, aqueous ammonia (NH4OH) as the catalyst and hydrogenated silicone oil (PMHS) as the hydrophobic modifier, and then pelleting the final product. The morphologies, surface chemical properties and thermal stability of the superhydrophobic bulk materials were characterized by scanning electron microscopy, Fourier infrared spectrometry and thermal analyzer. The hydrophobic properties and repairability of the as-prepared materials were also studied. The results showed that the prepared epoxy resin-hydrogenated silicone oil bulk materials were composed of tightly bound nanoparticles with a size of 50–100 nm in diameter. The material showed excellent superhydrophobic properties with a surface contact angle of 152°. The material also had good thermal resistance with a heat-resistant temperature of 300 °C and showed good repairability. The epoxy resin-hydrogenated silicone oil bulk superhydrophobic material exhibited excellent performance and showed wide application prospects.