3D-Printed Ultracompact Multicore Fiber-Tip Probes for Simultaneous Measurement of Nanoforce and Temperature

Optical fiber force sensing has attracted considerable interest in biological, materials science, micromanipulation, and medical applications owing to its compact and cost-efficient configuration. However, the glass fiber has an intrinsic high Young's modulus, resulting in force sensors being generally less sensitive. While hyperelastic polymer materials can be utilized to enhance the force sensitivity, the thermodynamic properties of the polymer may weaken the sensing accuracy and reliability. Herein, we demonstrate ultracompact three-dimensional (3D)-printed multicore fiber (MCF) tip probes for simultaneous measurement of nanoforce and temperature with high sensitivity. The sensor is highly sensitive to force-induced deformation due to the special geometric features of the polymer microcantilever, and the high-temperature sensitivity can be implemented through the poly(dimethylsiloxane) (PDMS) microcavity on the same fiber facet. Moreover, the sensitivities of the fiber interferometers are remarkably enhanced by introducing the optical analogue of the Vernier effect. Such a device exhibits a force sensitivity of 56.35 nm/μN, which is more than 103 times that of all-silica fiber force sensors. The PDMS microcavity provides a temperature sensitivity of 1.447 nm/°C, measuring the local temperature of the probe and compensating for temperature crosstalk of the force detection. The proposed compact MCF-tip sensor can simultaneously measure nanoforce and temperature with high sensitivity, facilitating multiparameter sensing in a restricted space environment and showing the potential in miniaturized all-fiber multiparameter sensors.