Solution-Processed Sb2S3-Based Heterojunction for Self-Powered Broad Band Weak Light Detection

Antimony sulfide (Sb2S3) has recently regained the attention of photovoltaic researchers as a promising solar absorber; however, its application for the detection of white light remains relatively unexplored. Herein, we report on the self-powered heterojunction photodetector based on a device-grade Sb2S3 film made at low temperature with solution processing. The Sb2S3 absorber film was prepared by single-step spin coating of a novel precursor ink using antimony trichloride as the antimony source along with the low melting thioacetamide as the sulfur source in 2-methoxyethanol, a low boiling environmentally friendly solvent. A simple TiO2/Sb2S3 heterojunction device made by using the film shows a power conversion efficiency of 1.22% without any hole transporting layer. Interestingly, the self-powered photodetector performance of the device under white light exhibits a high on/off ratio of 2.2 × 104 under 1 sun illumination. Moreover, this optical filter-free ultraviolet-visible absorbing near-infrared blind photodetector is equally capable of detecting both strong and weak white light, with a response time of 98 ms. Further, an example of the real-life application of the device is successfully demonstrated by constructing a weak light-detecting sunlight tracking system.