Adsorption and heat‐energy‐aid desorption of cationic dye on a new thermo‐sensitive adsorbent: Methyl cellulose/calcium alginate beads

The adsorption and heat‐energy‐aid desorption of methylene blue (MB) on a thermo‐sensitive adsorbent of methyl cellulose/calcium alginate beads (MC/CABs) has been studied. The addition of methyl cellulose intensified the desorption ability of adsorbent, and boosted the difference of adsorption capacity of adsorbent between low temperature and high temperature. At the mass ratio of methyl cellulose to sodium alginate of 2:1, the difference of adsorption capacity of MC/CABs between 20 and 60°C reached 20.48 mg g −1 . The effects of temperature, time and initial MB concentration on adsorption performance were investigated in detail. The MB adsorption on MC/CABs followed the pseudo‐second‐order kinetic model. The equilibrium data was fitted well with Langmuir isotherm. The maximum adsorption capacity of 336.70 mg g −1 exhibited MC/CABs had a good adsorption capability. Thermodynamic analyses showed high temperature was not favorable to MB adsorption, and MC/CABs had a distinct superiority in desorption of adsorbate with heat‐energy‐aid. Lastly, the possible mechanisms involving in adsorption and heat‐energy‐aid desorption were presented. POLYM. ENG. SCI., 56:1382–1389, 2016. © 2016 Society of Plastics Engineers