材料科学
环氧树脂
复合材料
石墨烯
氧化物
拉曼光谱
抗弯强度
复合数
X射线光电子能谱
极限抗拉强度
电介质
铸造
介电谱
纳米复合材料
热导率
热稳定性
热的
动态力学分析
聚合物
化学工程
纳米技术
物理化学
工程类
物理
光学
电化学
化学
冶金
光电子学
电极
作者
Sanjeev Kumar,K. G. Subramanian
摘要
Abstract The present work has the objective of fabricating graphene oxide ( GO ) and amine‐functionalized graphene oxide (F‐ GO ) reinforced epoxy composites using the casting method. Epoxy resin was dispersed separately with GO (0.5 wt%) and F‐ GO (0.5 and 1 wt%), and then the epoxy resin mixture cured with triethylenetetraamine at room temperature. The synthesized GO and F‐ GO were characterized by FT ‐ IR and Raman spectroscopy. The interfacial interaction of Si in the composite was studied by XPS . The formation of GO and F‐ GO was confirmed by XRD . The tensile and flexural strength composites were measured using the UTM . The thermal behavior and dynamic mechanical behavior were examined by TGA and DMA . The surface morphology and dielectrical properties were analyzed by SEM , TEM , and impedance analyses. The results obtained from epoxy/F‐ GO (0.5 wt%) composite revealed higher mechanical and thermal properties than neat epoxy and epoxy/ GO composites.
科研通智能强力驱动
Strongly Powered by AbleSci AI