摘要
Increased demand for plastics has resulted in the generation of plastic waste, which poses a threat to the environment in general, and ultimately the marine environment. Estuaries and deltas are the main filters of marine ecosystem pollutants from inland sources. There have been limited studies on temporal variations in microplastic (MP) pollutants in tropical estuaries of Africa. In 2022, a twelve-month sampling survey study was conducted at Sabaki river estuary, in Kenya. A bucket was used to collect water samples, that were sieved through a 225μm sieve. A stereo microscope was used to identify microplastics and their polymer confirmed using FTIR spectroscopy. Data analysis on seasonal difference in abundance of microplastics in surface waters was performed using Minitab software at α ≤ 0.05. The results indicated that the April-June (A-J) long rains season had significantly (P ≤ 0.05) higher levels of MPs due to rainfall runoff, compared to other seasons, namely January –March (J-M), July-October (J-O) and November –December (N-D). The (J-M), (J-O) and (N-D) seasons had similar levels of MPs, which were lower compared to those observed during (A-J) long rains season by 44.3%, 54% and 25% respectively, compared to the highest concentration of 264 MPs m-3 observed during the A-J season. Fragments type of MPs were higher during the wet season, while fiber type of MPs dominated during the dry season. Film and form type of MPs were least abundant. Seasons significantly (P ≤ 0.05) influenced distribution of the different sizes of MPs. Small and medium sized category of MPs occurred and dominated during the dry season, while larger particles dominated during the wet season. Seven (7) differently colored MPs were observed during the study. White colored MPs were most prevalent (33%), followed by blue (23%), black (17%), brown (12%), yellow (5%), red (5%), and green (4%). Five types of plastic polymers were found in surface waters of river Sabaki estuary, namely polyethylene (PE), polypropylene (PP), polystyrene (PS), Polyethylene terephthalate (PET), and Acrylonitrile-butadiene-styrene (ABS).